Unless you have strict deadlines hanging over you project completion becomes a flexible goal. The little eagle in the picture was started at the end of June as a demonstration of carving in very sub-optimal wood. It should have been completed weeks ago, but work on gilding was held up while I waited for a period when I could gild without large amounts of dust ruining the gold leaf. On the other hand, the little Town Class sloop is handily racing towards early completion. It’s destined to be a Christmas present and will be done as soon as I sand and varnish the mast hoop that it is going to be mounted in.
In the machine shop, there is a large bucket of spoon and spatula blanks that have been roughly carved, and are now waiting for finishing. I finished the blanks in August. They are what made the carving shop unsuitable for gilding. The bench in the machine shop is covered with cherry planks destined for a large ship portrait (an 1880’s era composite steam/ sail vessel). I have to finish jointing the boards and make final decisions on the arrangements of the planks before gluing up the blank. To ensure that blanks are stable and won’t split open after carving they have to cure for a few weeks before I start carving. So while I am very excited about the project I know that I won’t start it till January. More likely to see early completion are a few blanks destined for portraits of small catboats that I hope to take to a winter show.
So completion gets to be an elastic phenomenon. Clients complicate this elasticity; they want their portrait in time for an anniversary, birthday or before launching so the new quarter boards, billet head or transom eagle can be installed. The carver, boatbuilder or other craftsperson learn to plan. Eisenhower said that: “in preparing for battle I have always found that plans are useless, but planning is indispensable.” Although he never worked in a boatyard or carvers shop he had it right. You spend time planning, but admit that strict plans don’t always work well in small craft shops. That’s why there is that large rick of planks in the rafters – just in case. That’s why you have models, templates and notes on practice pieces for all your projects – in case you have to do it again.
Plans are certain to go awry: the wood needed is hard to find in local yards, the gilding has to wait, the paint or varnish is dry, but not cured, so, we have to wait. Most importantly to the company’s cash flow – The deposit has not been paid so now everything has to wait.